Studio City · LADBS

Roofing in Studio City, CA: before solar and under it

Cali Energy replaces and repairs roofs in Studio City under its C-39 roofing license, and where solar is involved it does the roof and the array as one job. On one Studio City house we measured the roof plane by plane and replaced twenty-seven squares before any module went on; on another, one square under a working array with battery storage was replaced with the modules lifted and every attachment re-flashed.

Studio City is in the City of Los Angeles, so LADBS permits re-roofs here and a full re-roof has to meet the city's cool-roof rule. On our 2026 Studio City project one square of roof under a solar array with battery storage was permitted on 25 March and replaced on 30 March: the system was shut down, the modules over the section lifted, the covering replaced, every attachment re-flashed and the array returned to service. Cali Energy, a licensed roofing and solar contractor (CSLB #1032379, C-39 and C-10), does the roof and the solar work with its own crews.

Large solar modules laid out across a new shingle roof with rooftop equipment and trees beyond, Studio City
Black modules along a re-covered shingle roof in Studio City, with autumn trees beyond

Studio City roofs

  • Roofs over mid-century houses. The median house in ZIP code 91604 dates from 1951 (6,018 single-family homes, LA County Assessor).
  • Re-roofs here. Between January 2025 and May 2026, LADBS issued 245 re-roof permits for houses and duplexes in the Studio City neighborhood council area.
  • The cool-roof rule. A full re-roof in the City of Los Angeles has to use a covering whose rated color meets the city's reflectance rule, so we check the color before anything is ordered. The cool-roof rule
  • Several planes, flat sections, skylights. One of our Studio City roofs combined pitched planes with a flat section and skylights, and the survey found mastic-sealed penetrations, debris collected in the valleys and worn spots on the flat section.

Studio City roofs we have replaced

A tape measure held against the edge of a roof section, reading in inches, Studio City
Studio City, CA · 2020 – 2026 · LADWP / LADBS

The roof was measured before anything was quoted.

Measured with a tape and photographed plane by plane, re-covered with twenty-seven squares over the existing sheathing, closed out in January 2026, and only then a 12.95 kW array.

Measure first, then the covering, then the array

On a single-story Studio City house with several planes, a flat section and skylights, the roof was measured with a tape and photographed plane by plane before anything was quoted. What the survey found decided the order: the covering came first, twenty-seven squares replaced over the existing sheathing with the permit closed out in January 2026, and then the 12.95 kW array went on, spread across the planes the survey had identified. New roof and solar together

One square under a working array

In March 2026 a section of shingle under a Studio City array with battery storage needed replacing. We filed the re-roof permit for one square on 25 March; on 30 March the system, storage included, was shut down, the modules and racking over the section came off, the covering was replaced, a new flashing went under every attachment, and the array was reset and returned to service. Solar panel removal and reinstallation

How a roofing job runs in Studio City

  1. Survey plane by plane, with photographs of every penetration, valley and flat section.
  2. Covering and color checked against the cool-roof rule; a written scope.
  3. LADBS re-roof permit sized to the job, from one square to a full roof.
  4. Under an array: the system shut down, the modules over the work lifted, every attachment re-flashed.
  5. Final, and the array back on new flashings.

Nearby. Roofing in North Hollywood · Encino · Burbank · All our Studio City projects

Roofing questions for Studio City

Does Cali Energy do roofing in Studio City?

Yes. Cali Energy replaces and repairs roofs in Studio City under its C-39 roofing license, with the LADBS permit, and handles the solar on the same roof under its C-10 license. CSLB #1032379, based in Northridge; call +1-323-844-7777.

Can a section of roof under solar panels be replaced?

Yes. On our 2026 Studio City project one square under a working array with storage was replaced: the system shut down, the modules over it lifted, the covering replaced, every attachment re-flashed, and the array reset.

Should the roof be replaced before solar goes on?

On our Studio City house it was, because the survey found patched penetrations and a worn flat section: twenty-seven squares went on first, then the array.

Does a Studio City re-roof have to be a cool roof?

A full re-roof in the City of Los Angeles has to meet the cool-roof rule, which depends on the product and its rated color; on our Studio City jobs we check the color before ordering.

Get your Studio City roof scoped

Tell us the covering, whether solar is on the roof or planned, and what you have noticed: a leak, a soft spot, worn flat sections. We survey the roof plane by plane, check the color against the cool-roof rule and give you a written scope and the permit.

Get a Studio City roofing quote Call +1-323-844-7777

CSLB #1032379 · B, C-10, C-39

Cali Energy · Northridge, CA · cali-energy.com