Solar panel removal and reinstallation in Simi Valley, CA
When a Simi Valley roof needs work under an array, Cali Energy takes the modules and racking down, makes the roof safe for the roofer, sets new attachments into the finished roof and brings the system back online. We can replace the roof ourselves under our C-39 roofing license, or work to your roofer's schedule.
In Simi Valley a removal and reinstallation runs on two permits at once: the roofer's roofing permit and the solar contractor's electrical permit, which the City of Simi Valley issues only after checking that the contractor holds a city business tax certificate. On our July 2025 Simi Valley project the permit issued in early July, the array came off, the roof work was done, and the modules went back on new attachments flashed into the finished roof.
What Simi Valley checks before the array comes off
- Two permits. The roofing permit belongs to whoever replaces the roof; the electrical permit for taking the system down and putting it back belongs to the solar contractor. Your roofer cannot start under an array until that electrical permit exists.
- The city business certificate. California licenses contractors at state level; Simi Valley also requires a municipal business tax certificate, and the permit counter verifies it before issuing anything. Cali Energy holds it, and on our 2025 project the permit issued in early July.
- The roofs here. On our Simi Valley jobs, tile and shingle come up in roughly equal measure, from barrel and S-tile to architectural shingle, on housing largely from the 1970s and 1980s. A tile roof under an array is lifted and relaid; a shingle roof is torn off and rebuilt. Tile roof repair
- The warranty. Module warranties generally require removal and reinstallation by an installer the manufacturer authorizes. We put every module back on new positions, flashed into the finished roof, rather than reusing the old holes.
How it ran on our Simi Valley project
- Scheduled against the roofing work, so the array was off only as long as the roof needed.
- Removal: the array and racking came down and the roof was made safe for the work beneath it, under our C-10 electrical license.
- Roof work by the roofer on the roofing permit.
- New attachments set into the finished roof, flashed, under our C-39 roofing license.
- Reinstallation: the original modules reconnected and the system brought back online.
Our Simi Valley removal and reinstallation
Simi Valley: the city business certificate the permit counter checks.
Array off, roof work done, modules back on new flashed positions; the city checked our business certificate at the permit counter.
Removal and reinstallation questions for Simi Valley
Does Cali Energy remove and reinstall solar panels in Simi Valley?
Yes. On our July 2025 Simi Valley project Cali Energy took the array down for roof work, set new attachments flashed into the finished roof and reinstalled the original modules, on the city's electrical permit alongside the roofing permit. CSLB #1032379, based in Northridge; call +1-323-844-7777.
Why is my roofer waiting on the solar contractor's permit?
Because the removal and reinstallation runs on its own electrical permit from the City of Simi Valley, and the city checks the contractor's business tax certificate before issuing it. We hold the certificate, and we file the permit before the roofer's start date.
Can you replace the roof too?
Yes, under our C-39 roofing license, so the array, the roof and the flashing sit in one scope. Roofing in Simi Valley
Read next
Plan the panels and the roof as one job
Send a photo of the array and tell us what the roof needs. We will schedule the removal, the roof work and the reinstallation as one plan, with the city permits each part requires.
Get a Simi Valley removal quote Call +1-323-844-7777
Cali Energy · Northridge, CA · cali-energy.com